No products
Prices are tax excluded


_result.jpg)


_result.jpg)
This item is a PVC Wall Plug and Screw Set, a standard light-to-medium duty fastening solution designed for securing fixtures into masonry, concrete, and brick walls. This kit provides a matched pair of anchors and screws to ensure a perfect fit and maximum holding power.
Anchor Material: High-grade Polyvinyl Chloride (PVC). The material is chosen for its flexibility and ability to expand without splitting, providing a long-lasting grip.
Screw Type: Includes countersunk cross-head (Phillips) steel screws, typically zinc-plated for basic corrosion resistance.
Anti-Rotation Wings: The PVC plugs feature small external "fins" or wings that prevent the plug from spinning inside the hole while the screw is being driven in.
Split-Body Design: The plug is split down the center to allow for uniform expansion against the walls of the substrate as the screw is inserted.
| Application | Description |
| Electrical | Mounting switch boxes, conduit clips, and light fixtures. |
| Home Decor | Hanging mirrors, picture frames, curtain rails, and bathroom accessories. |
| Small Hardware | Securing coat hooks, door stops, and small shelving brackets. |
| Signage | Attaching lightweight plastic or metal signs to exterior or interior walls. |
Drill: Use a masonry drill bit of the same diameter as the PVC plug (e.g., a 8mm bit for a 6mm plug).
Depth: Drill the hole slightly deeper than the length of the plug to allow for the screw tip.
Clean: Remove dust from the hole for a better grip.
Insert: Push the PVC plug into the hole until it is flush with the wall surface.
Fix: Place the item you are mounting over the plug and drive the screw through the item and into the plug until tight.
Quantity: 1 Box (Contains 100 sets of Plugs and Screws).
Commonly used for: General household maintenance, electrical installations, and DIY renovation projects.

No customer reviews for the moment.
Viewed products