W42 400ML BRITE CHECK WELDING COLOR CHECK - CLEANER / PENETRANT / DEVELOPER WELDING CHECK

Product Details

Taseto Color check is a Penetrant testing material which is widely used in the inspecting or surface discontinuities of welds, forgings, Pressure Vessels, Casting, General Metal Work, Power Plant Construction & Leak Testing.

Variant:

1. BRITE CHECK Color Check Remover/Cleaner - Blue W42-DR60

2. BRITE CHECK Color Check Penetrant - Red W42-D40

3. BRITE CHECK Colour Check Developer - White W42-DP100

Features:

1. Applicable to all material grades, except for porous materials. Flaws open to material surface can be detected

2. Flaws are magnified and indicated clearly in red on white developer films

3. Easy to use. suitable for quick inspections

4. No special equipment is required

5. Flaw detectability is high, bringing about highly reliable re

sults

Applicable Materials:

Ferrous materials : Mild steels, high tensile steels, stainless steel, aluminium, brass, various other alloys

Non-ferrous materials: Ceramics, glass, synthetic resins

Method of Application:

Cleaning - Wipe off superficial dye penetrant with a waste soaked with the remover. If you used the water washable penetrant, spray shower water

Penetrant - Test area and allow to dwell for 5-10 minutes. Remove the excess penetrant from the surface.

Developing - Apply a thin coat of the well agitated developer to the test surface. Normal developing time is 7 to 30 minutes

Notes on Usage:

1. Agitate the developer thoroughly before use

2. If the aerosol can does not inject uniformly under low temperatures, warm up the can in about 30℃ tepid water

3. Except for non-Flammable type Colour Checks, Use extreme care to fire sources

4. Perform the operation in well ventilated spaces

5. Application: General penetrant inspection & penetration test

Specification:

Brand: Taseto / BRITE CHEK

Product Type: Oil Leak Remover Lubricant

Indication pattern: Red/White

Target: Oil, Organic Solvents, Lubricant Ta

Applicable Materials:

Ferrous materials : Mild steels, high tensile steels, stainless steel, aluminium, brass, various other alloys

Non-ferrous materials: Ceramics, glass, synthetic resins

Method of Application:

Cleaning - Wipe off superficial dye penetrant with a waste soaked with the remover. If you used the water washable penetrant, spray shower water

Penetrant - Test area and allow to dwell for 5-10 minutes. Remove the excess penetrant from the surface.

Developing - Apply a thin coat of the well agitated developer to the test surface. Normal developing time is 7 to 30 minutes

Notes on Usage:

1. Agitate the developer thoroughly before use

2. If the aerosol can does not inject uniformly under low temperatures, warm up the can in about 30℃ tepid water

3. Except for non-Flammable type Colour Checks, Use extreme care to fire sources

4. Perform the operation in well ventilated spaces

5. Application: General penetrant inspection & penetration test

Specification:

Brand: Taseto / BRITE CHEK

Product Type: Oil Leak Remover Lubricant

Indication pattern: Red/White

Target: Oil, Organic Solvents, Lubricant Tanks, Piping Leaks