ENGLAND TRIANGLE CARBON STEEL HAND TAP - MM SIZE 3mm TO 30mm

Reference: D43-

Condition: New

This product is no longer in stock

Remove this product from my favorite's list.
Add this product to my list of favorites.
Share on Facebook!
Print

More info

England Triangle Carbon Steel Hand Taps (3mm – 30mm)

England Triangle brand hand taps are reliable, entry-level threading tools designed primarily for maintenance, repair, and general DIY projects. Manufactured from high-quality carbon steel, these taps are best suited for manual threading operations in softer materials.

Key Specifications

Material: High-Carbon Steel (HCS)
Size Range: M3 to M30 (Metric Coarse)
Thread Type: Metric (MM)
Set Composition: Usually sold as a set of 3 (Taper, Second/Plug, and Bottoming)
Flute Design: Straight flute (ideal for through holes or blind holes in brittle materials)

Best Use Cases & Material Compatibility

Because these taps are made of Carbon Steel rather than High-Speed Steel (HSS), they have specific limitations:

Ideal Materials: Mild steel, aluminum, brass, copper, plastics, and cast iron.
Not Recommended For: Stainless steel, alloy steels, or high-volume production (these require HSS or Cobalt taps).
Operation: Manual use with a Tap Wrench. They are not designed for high-speed machine tapping as carbon steel loses its hardness at high temperatures.

The 3-Piece Set Breakdown

When you purchase these in sets, each tap serves a specific stage of the process:

Taper Tap (First): Has a long lead (8–10 threads) to help align the tap and start the thread easily.
Second/Plug Tap: Has a shorter lead (3–5 threads). Used to deepen the thread after the taper tap.
Bottoming Tap: Has very few lead threads (1–2). Used to cut threads to the very bottom of a "blind" hole.

Pro Tip: Always use tapping oil or a suitable lubricant to reduce friction and prevent the carbon steel from snapping, especially in sizes below M6.